Opis i karakteristike
HIPS (High Impact Polystyrene) is a polystyrenebased polymer enhanced with rubber additives to improve its impact resistance. It is widely recognised as an excellent support material for ABS and ASA prints, as it can be easily dissolved in dLimonene, allowing for the creation of complex geometries without leaving marks from manual support removal. Beyond its use as a support, HIPS is a durable, lightweight, and dimensionally stable material suitable for standalone use in prototyping, casings, and generalpurpose mechanical parts. It is foodsafe and easy to machine, paint, or glue. While it exhibits warping similar to ABS, this can be mitigated by using a heated bed and an enclosed printing environment. Technical Specifications Material Base: 100% Virgin Pellets (High Impact Polystyrene) Function: 3D Printing, Modelling, and Soluble Support Package: Box + Vacuum seal + Desiccant Recommended Print Layer Resolution: 0.10.2mm Printing Temperature: 220250C Print Bed Temperature: 90115C Tensile Strength: 2732 MPa Flexural Strength: 4087 MPa Flexural Modulus: 15001600 MPa Impact Strength (IZOD, 23C): 787 J/m Elongation at Break: 1264% Distortion Temperature: 78100C Note: Due to the styrene content, it is recommended to print in a wellventilated area or an enclosed chamber.
Promena cene
Trenutno najbolja ponuda:
3.200,00 din u MPM Dynamics
Recenzije korisnika
Popularni proizvodi u Srbiji
