Intenso SSD M.2 NVMe Gen.3Ă—4 1TB 3835460 Read 2100MB/s \Write 1700MB/s cene

Form factor: m.2 2280 Interface: m.2 Protocol: PCI Express (PCIe) Gen.3x4 NVME 1.3 Sequential reading: Up to 2100 MB/s Sequential writing: Up to 1700 MB/s MTBF: 1.500.000 hours TBW: 600 TB Properties: Advanced 3DNand technology with SLC data boostcache Features: SMART & TRIM Command Support Specs Features NVMe version 1.3 SSD capacity The Solid State Drive's data storage capacity. 2 TB SSD form factor The size of the solidstate drive, given in inches M.2 Interface Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA2. PCI Express 3.0 NVMe NVM Express (NVMe) or NonVolatile Memory Host Controller Interface Specification (NVMHCIS) is an open logical device interface specification for accessing nonvolatile storage media attached via a PCI Express (PCIe) bus. NVM Express, as a logical device interface, has been designed to capitalize on the low latency and internal parallelism of solidstate storage devices. Memory type Type of memory in the device e.g. DDR3, SRAM (Static RAM). 3D NAND Component for What this product is used as a part of (component for). PC M.2 SSD size 2280 (22 x 80 mm) Read speed The speed at which a device can read data. 2100 MB/s Write speed The speed at which a device can write data. 1700 MB/s PCI Express interface data lanes x4 S.M.A.R.T. support TRIM support Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. 1500000 h Protection features Physical effects from which the product is protected e.g. water resistant, crash proof. Shock resistant Features TBW rating 1200 Brandspecific features Brand specific technologies SLC Caching Weight & dimensions Width The measurement or extent of something from side to side. 22 mm Depth The distance from the front to the back of something. 4 mm Height The measurement of the product from head to foot or from base to top. 80 mm Weight Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies. 6 g Packaging data Package width The distance from one side of the packaging to the other. 171 mm Package depth The distance from the front to the back of the packaging. 117 mm Package height The distance from the top to the bottom of the packaging. 25 mm Package weight Weight of the packaged product. 35 g Package type The type of product package e.g. box. Hanging box